How Do You Jump Start A Totally Dead Battery?.
How to Jump Start a Totally Dead Battery
Avoiding the Panic:
We've all been there: you're in a hurry to get somewhere, but your car won't start. The battery is completely dead, and you don't have a jump starter handy. Don't worry, you're not alone. This happens to people all the time.
The good news is that there are a few things you can do to get your car started again. In this article, we'll show you how to jump start a totally dead battery using a car battery charger or booster cable.
Gathering the Essentials:
Before you start, make sure you have the following items:
- A car battery charger or booster cable
- A set of jumper cables
- A working car with a healthy battery
- Safety glasses
- Gloves
Step 1: Check the Battery:
Before you do anything else, check the battery to make sure it's completely dead. You can do this by using a voltmeter or by checking the battery terminals. If the battery is completely dead, the terminals will be loose and the battery will be cool to the touch.
Step 2: Turn Off All Electrical Devices:
Once you've determined that the battery is dead, turn off all electrical devices in your car. This includes the headlights, the radio, and the air conditioning. You should also turn off the ignition.
Step 3: Prepare the Jumper Cables:
Lay out the jumper cables so that they are easy to connect. The red cable should be connected to the positive terminal of the dead battery, and the black cable should be connected to the negative terminal of the dead battery.
Step 4: Connect the Jumper Cables:
Carefully connect the red cable to the positive terminal of the healthy battery. Then, connect the other end of the red cable to the positive terminal of the dead battery. Next, connect the black cable to the negative terminal of the healthy battery. Finally, connect the other end of the black cable to a grounded metal part of the dead car, such as the engine block or a chassis bolt.
Step 5: Start the Car:
With the jumper cables connected, start the car with the healthy battery. Once the car is started, let it run for a few minutes to charge the dead battery.
Step 6: Disconnect the Jumper Cables:
Once the dead battery is charged, disconnect the jumper cables in the reverse order that you connected them.
Step 7: Drive the Car:
Drive the car for at least 30 minutes to allow the battery to fully charge.
Safety Tips:
- Always wear safety glasses and gloves when working with jumper cables.
- Do not smoke or allow open flames near the battery.
- Do not touch the terminals of the battery with your bare hands.
- If you are not comfortable jump-starting a car, it is always best to call a tow truck or roadside assistance.
Additional Tips:
- If you are jump-starting a car in cold weather, you may need to charge the battery for longer.
- If you are jump-starting a car with a manual transmission, make sure the car is in neutral.
- If you are jump-starting a car with a remote starter, you may need to start the car with the key.
Conclusion:
Jump-starting a totally dead battery is a relatively simple process. By following the steps in this article, you can get your car started again and be on your way.
.